Tub-to-Shower Conversion Cost in Weatherford, TX
See the Weatherford tub-to-shower cost range, what stays outside a conversion, and what to ask about shower glass, grout, and the valve if you have hard water.
On this page
If you’re ready to take out a tub and put a shower in its place, start with the part of the bathroom you want to change. Look at the vanity, the floor outside the tub area, and the walls you plan to keep. Then make a list of the work you want inside the new shower. That gives you a way to ask for a conversion quote and see what work it covers.
Salvation Home Remodeling lists $15,000 to $20,000 for a tub-to-shower conversion, with the rest of the bathroom left untouched. The same conversion range applies to every tub. Our guide to small bathroom remodel ideas for Weatherford homes covers ideas for the room. This guide starts after you’ve chosen a conversion. It walks through the price scope and the questions to ask about the glass, grout, and shower valve. See our Weatherford bathroom remodeling page if you’re considering a wider project.
Use one range for the conversion
Use the same range whether your tub sits in a corner or between walls. Bring a photo of the tub and the area around it so you can point to what stays. If you want to change the vanity or the flooring outside the tub area as well, put that work on its own list. Ask where it appears in a wider quote. The conversion range covers the tub-to-shower scope with the rest of the bath left untouched.
Ask for a written scope that starts with taking out the tub and ends with the work at the edge of the shower. Look for the parts you can see, like the glass and tile, and the work you’ll want described before it’s covered up. Ask what the quote includes for removal and disposal, the shower walls and floor, and drainage and water connections. Then ask which choices still need to be made.
When a line names a finish or fixture you haven’t picked, ask which option the quote uses. Put any change you’re considering on the same page as the original scope so you can compare the two. For example, if you’re looking at two glass options, pair each one with the same tile and valve choices. Ask for the difference before you make up your mind.
Pick glass with cleaning in mind
If you deal with hard water, show the contractor where you notice spotting on your current shower glass or nearby fixtures. Think about where you will stand to wipe the new glass and whether you can reach both sides. If you’re trying a door in a showroom, open it the way you would at home. Picture where the wall and vanity sit relative to the door.
Ask what glass and hardware the quote is based on. If you’re choosing between a panel and a door, ask which part of the opening each one would cover. Confirm which side the handle goes on and where you’ll have room to reach the glass. Ask for the care instructions for the glass and hardware you’re considering. Use the same questions for every option you compare.
If one option includes a glass treatment, ask for its name and care instructions. Ask where the treatment appears in the quote and whether it changes the price. Pick based on the work you’re being quoted and what you’re willing to care for after you start using the shower.
Check the grout and the valve before you settle the scope
Look at the tile and grout together. Bring a picture of a spot where you already spend time cleaning. On the sample board, point out the grout joints you’d need to reach. Ask the contractor which grout the scope calls for and how the maker says to clean it. Keep those instructions with the tile and grout choices so you have them when you need them.
Salvation Home Remodeling uses Schluter waterproofing on showers. Ask where the written scope explains the work behind the tile. It helps to mark that part of the quote while you’re still looking at surface choices so you can find it later. Ask how the work is described where the shower meets the rest of the bathroom you’re keeping.
At the valve, ask which parts stay and which get replaced. Look at the handle and trim you’ll touch, then ask what the quote covers behind the wall. If your current shower has buildup around the trim or showerhead, mention where you see it. Ask how you would reach those spots with the fixtures you’re considering and which care instructions go with them.
Before work starts, ask for the names of the grout and valve in the quote. If the valve and trim have separate model names, keep both with the shower details. Ask which care instructions apply to the parts you can see. Keep those details with the glass choice so you can look up the right instructions for each part later.
Read the quote from the tub area out
Walk through the scope in order. Start with the existing tub and end at the finish where the shower meets the floor or wall you’re keeping. For each item, ask what stays, what gets replaced, and who supplies the new part. Think about the glass, grout, and valve together so you can read how each choice appears in the overall quote.
If the scope leaves an item open, write it down before you compare the totals. Ask how a later choice would appear in the revised price. If you’re asking about a separate change elsewhere in the room, keep it on a separate line so you can still see the conversion by itself.
Read the written warranty along with the scope. Salvation Home Remodeling provides a written warranty with 3 years on everything we touch on the job and 5 years on our workmanship.
Tub-to-shower conversion questions
Does the range change with my tub type?
Salvation Home Remodeling uses the same conversion range for every tub. Bring a photo and show where the tub sits. Ask for the scope that applies to the space you have, including where the work ends and the parts of the bathroom you’re keeping begin.
How do I tell what glass the quote covers?
Look for the glass and hardware choice in the written scope. Ask where the panel or door would sit and how you would reach it to clean. If you’re considering a different option, ask for that choice and any price difference in writing.
Can I keep the shower valve I already have?
Ask the contractor to look at the current valve and describe what can stay for your proposed conversion. If you’re comparing scopes, ask each contractor to identify which parts of the valve and trim they’d keep or replace. That gives you a useful way to compare the work.
How are permits billed?
Ask whether your planned conversion needs a permit. Permits are billed at cost.
What should I bring when I ask about converting my tub?
Bring photos of the tub area, the shower fixtures you have, and the parts of the bathroom you want to keep. List any spots that are hard to clean and the choices you still need to make. To discuss your Weatherford conversion, call Salvation Home Remodeling at 817-210-7117 or use our contact page.