Walk-In Shower Cost in Fort Worth (2026): What We Actually Charge
If your shower is failing — cracked pan, loose tile, water finding its way where it should not — you do not automatically need a full bathroom remodel. A standalone walk-in shower, with the rest of the room untouched, runs $10,000–$15,000. That is the real range we quote in person here in Fort Worth, and we confirm it after a free walk-through of the actual space.
The Short Answer
- Standalone walk-in shower (shower only, rest of the bathroom untouched): $10,000–$15,000
- Tub-to-shower conversion: $15,000–$20,000 — a different job, because the drain, valve, and framing all start in the wrong place. The tub-to-shower conversion cost guide walks through it.
- Tile surround and waterproofing only: $4,500–$5,500 — about a week of work. Surround plus tub replacement: $6,000–$9,000.
- Shower as part of a full primary bath remodel: inside the $25,000–$45,000 range — the Fort Worth bathroom remodel cost guide covers those tiers.
We quote these scopes separately on purpose. A shower-only job never gets priced off a full-remodel range, and you will always know which number you are looking at.
What the $10,000–$15,000 Actually Buys
- Demo and haul-off of the existing shower down to the studs where needed
- A rebuilt pan with proper slope and properly placed drainage
- A Schluter waterproofing system — waterproofing is a system, not a paint-on afterthought
- Tile set right, with sealed penetrations, and run to the height the design calls for
- Frameless glass — it is the only glass we install
- Delta or Moen valve and trim, unless you bring your own selections
- Finish work where the new shower meets the rest of the room
Walk-In Shower vs. Tub-to-Shower Conversion
The two jobs end in the same place — a tiled walk-in shower — but they do not start in the same place. A rebuild works inside a footprint that was already a shower: the drain is where it belongs and the framing fits the job. A conversion starts with a tub, which means moving and resizing the drain, resetting the valve height, and reframing the alcove for a pan and curb. That extra plumbing and carpentry is why a conversion runs $15,000–$20,000 while a rebuild runs $10,000–$15,000. If you are not sure which one your bathroom needs, the walk-through settles it in about a half hour.
What Moves the Number
Tile is the biggest variable — the spread between builder-grade and designer tile is real, and running it to the ceiling adds labor. Glass configuration matters: a single fixed panel and a full frameless enclosure are different line items. Benches, niches, and multiple shower heads add build time. A zero-entry design changes how the pan and slope get engineered, so tell us early. And when demo opens a wall in an older Fort Worth home, we occasionally find past leaks or rotted framing — if that happens, we stop, show you photos, and price the fix in writing before any extra work begins.
How We Build It
Every shower we build gets a Schluter waterproofing system. Shower glass is frameless only. Fixtures are typically Delta or Moen. Crews run Monday through Friday, 8am to 6:30pm, plus a couple of Saturdays a month when a schedule calls for it. Xavier walks projects daily and Chris reviews every project at least weekly, so nothing drifts quietly. Our full process is on the bathroom remodeling page, and the custom shower installation page shows the scope on its own.
Payment, Quotes, and Paperwork
- Projects under $60,000: 50% down, 50% at completion.
- We accept check, Zelle, bank transfer, or cash; credit cards carry a 3% processing fee.
- Quotes are good for 30 days.
- Change orders are priced at cost plus 25%, in writing, before the work continues.
- Permits are billed at cost and are not padded into the quote.
Fort Worth Specifics
We are a Fort Worth & Aledo city-registered building contractor (#RB026782 / #25-000007), insured. When your scope requires a permit, we coordinate it and plan the work around inspection steps. These ranges hold across our service area — see the bathroom pages for Southlake and Colleyville if that is closer to home.
Frequently Asked Questions
Does the $10,000–$15,000 include the glass?
Yes. Frameless glass is part of the scope — it is the only glass we install. The configuration moves the number within the range: a single fixed panel sits lower, a full frameless enclosure sits higher.
Can you build it zero-entry?
Yes. Zero-entry and low-curb showers are something we build, and grab bars and benches can be planned in from the start. The pan, slope, and drainage get engineered differently, so bring it up at the walk-through — it is much easier to plan than to retrofit.
My shower leaks. Can you just patch the pan?
Honestly: usually not, and we will tell you why on site. A leaking pan almost always means the waterproofing system behind it has failed, and a patch buries the problem. Small handyman-sized repairs are not really our lane — the smallest projects we typically take on run about $5,000 and up — but if a repair genuinely is the right answer, we will say so and point you the right direction.
Do I have to redo the whole bathroom?
No. This scope exists so you do not have to. If the vanity, floor, and paint still serve you, we build the shower and leave the rest alone. If you are leaning toward the full remodel anyway, the cost guide lays out what each budget actually buys.
Get a Real Number for Your Shower
Serving Fort Worth since 2001; Salvation Home Remodeling LLC established 2017. Based in Fort Worth, TX and serving homeowners across Tarrant County and the surrounding areas. Our Foundation is Faith. Our Standard is Craftsmanship.
Request a free walk-through estimate or call/text 817-210-7117 — we will look at the actual space and give you a number we will stand behind.