Stylish bathroom renovation featuring gray subway tiles and updated fixtures.

Tile Tub Surround Cost in Fort Worth: What We Charge

A tile tub surround with waterproofing in Fort Worth runs $4,500 to $5,500 with us and takes about a week. With a new tub, $6,000 to $9,000.

The short answer

A new tile tub surround with waterproofing runs $4,500 to $5,500 with us and takes about a week. If the tub is replaced too, the job runs $6,000 to $9,000. Both prices are for tile over a waterproofing system. This page does not price acrylic or fiberglass wall panels.

On this page
  1. Two jobs, two prices
  2. Why the waterproofing matters more than the tile
  3. This page is about tile
  4. When a surround is the wrong fix
  5. What can change the price after we start
  6. How you pay
  7. How to get your number
  8. Questions homeowners ask

The walls around a tub take more water than any other surface in the house. When the tile there fails, you do not need a full bathroom remodel to fix it. This page gives our price for the surround by itself, and tells you when a surround is the wrong fix.

Planning a bathroom remodel? Tell us what you want to change. 3 quick taps, then we call you.

Plan my remodelSee our work

Key points
  • Tile surround with waterproofing: $4,500 to $5,500, about one week.
  • Surround plus a new tub: $6,000 to $9,000.
  • Behind the tile we use Schluter waterproofing.
  • This is a part-only job. It is not priced as a full bathroom remodel.
  • Permits are billed at cost and are not in the quote.

Two jobs, two prices

The jobOur price
New tile surround with waterproofing. The tub stays.$4,500 to $5,500, about one week
New tile surround and a new tub$6,000 to $9,000
These are our own prices for a part-only job. The rest of the bathroom is not touched.

The question that picks the row is simple. Is the tub itself still good? If it is, the first row is your job. If the tub is worn, cracked or the wrong size, look at the second row.

AI illustration of the walls around a bathtub covered with a waterproofing layer before tile
AI illustration. Not a photo of our work. The waterproofing goes on the wall before the tile.

Why the waterproofing matters more than the tile

Tile and grout are not what keeps water out of your wall. Grout lets a little water through. The layer behind the tile does the real work.

Behind the tile we use Schluter waterproofing. It is a full system that covers the wall before one tile goes up. Our guide shows how we waterproof a shower.

This is the main reason a tiled surround is a bigger job than a set of wall panels. The old tile comes off. The waterproofing goes on. Then the tile is set. That is about a week of work, and it is why the price is what it is.

This page is about tile

When people search for a tub surround, many of them mean a panel kit made of acrylic or fiberglass. That is a different product and a different job.

Our prices on this page are for a tile surround over a waterproofing system. We do not print a price here for wall panels.

If you are choosing the tile, read choosing tile that lasts.

AI illustration of a finished tile surround around a bathtub
AI illustration. Not a photo of our work. A tile surround with the tub left in place.

When a surround is the wrong fix

A new surround fixes the walls around the tub. It does not fix a bathroom that no longer works for you. Here are three cases where another job is the better answer.

One more small job, in case it is on your list. A new vanity by itself runs $3,000 to $5,000.

What can change the price after we start

We cannot see the wall behind old tile until the tile is off. If that wall is damaged, we stop, show you photos, and price the fix in writing before any extra work begins.

That is a change order, and ours are priced at cost plus 25%.

How you pay

  1. 50% down.
  2. 50% at completion.

That is the schedule for every job under $60,000. We prefer check, Zelle, bank transfer or cash.

How to get your number

It starts with a free walk-through. We look at the tub and the walls, and we write the scope. The quote is good for 30 days. Permits are billed at cost and are not in the quote.

Our typical start is one to two weeks out, depending on our schedule. Our own in-house crew does the work.

Every job carries a written warranty with two terms: three years on everything we touch, and five years on our workmanship. Manufacturer warranties on materials pass through to you. To set a walk-through, call or text 817-210-7117.

Questions homeowners ask

How much does a tile tub surround cost in Fort Worth?

With us, a tile surround with waterproofing runs $4,500 to $5,500. With a new tub, the job runs $6,000 to $9,000.

How long does a tub surround take?

A tile surround with waterproofing takes about one week.

What goes behind the tile?

Schluter waterproofing. It covers the wall before the tile goes up.

Is a new surround a bathroom remodel?

No. It is a part-only job with its own price, and the rest of the room is not touched. Our bathroom remodel cost guide has the prices for a complete room.

Can you replace the tub at the same time?

Yes. A new surround with a new tub runs $6,000 to $9,000.

Pictures marked “AI illustration” are made with AI. They are not photos of our jobs. See real photos in our project gallery.

Planning a bathroom remodel? Tell us what you want to change. 3 quick taps, then we call you.

Plan my remodelSee our work

Service Area Map
Job costs tracked with Job Cost Pro — built by our owner.

Privacy Policy

Salvation Home Remodeling
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.